Metal Furniture Frame and Finish Specifications in Foshan
Define metal, profile, thickness, joints, welding, finish, floor protection and environment to create an inspectable specification.
Terms such as “iron frame,” “stainless colour” or “powder coated” do not adequately control a metal furniture product. State the actual metal or confirmed grade, profile shape and dimensions, wall or sheet thickness, joints and welding, grinding level, finish system, colour and sheen, floor glides, and whether the product is for indoor, humid or outdoor use.
Scope of this guide
This guide provides an execution framework for furniture sourcing and product selection. Contract, inspection, freight, installation and destination-country requirements should be confirmed in writing by the relevant supplier or professional adviser.
Set the decision standard first
- Confirm metal and profile section
- Define joints, welding and grinding
- Specify the complete finish system
- Check floor and dissimilar-material contact
What to define and retain
| Specification field | What to define |
|---|---|
| Confirm metal and profile section | Record the actual material or supplier-confirmed grade, tube or sheet shape, outside dimensions and thickness |
| Define joints, welding and grinding | State visible and hidden welds, connectors, fasteners, weld continuity and the required appearance treatment |
| Specify the complete finish system | Distinguish plating, powder coating, paint or another process and record preparation, colour, texture, sheen and approved sample |
| Check floor and dissimilar-material contact | Confirm glides, levelling, sharp-edge protection and separation or cushioning where metal meets glass, stone or wood |
| Validate for environment and packing | State indoor, outdoor, humid, coastal or high-use conditions and check film, corners, stacking and transport abrasion |
Recommended workflow
- Confirm metal and profile section: Record the actual material or supplier-confirmed grade, tube or sheet shape, outside dimensions and thickness
- Define joints, welding and grinding: State visible and hidden welds, connectors, fasteners, weld continuity and the required appearance treatment
- Specify the complete finish system: Distinguish plating, powder coating, paint or another process and record preparation, colour, texture, sheen and approved sample
- Check floor and dissimilar-material contact: Confirm glides, levelling, sharp-edge protection and separation or cushioning where metal meets glass, stone or wood
- Validate for environment and packing: State indoor, outdoor, humid, coastal or high-use conditions and check film, corners, stacking and transport abrasion
At every step, retain the product ID, version, date, owner and written confirmation so critical decisions do not remain only in chats or verbal discussions.
Common execution problems
- If this is not defined in writing: Confirm metal and profile section — Record the actual material or supplier-confirmed grade, tube or sheet shape, outside dimensions and thickness
- If this is not defined in writing: Define joints, welding and grinding — State visible and hidden welds, connectors, fasteners, weld continuity and the required appearance treatment
- If this is not defined in writing: Specify the complete finish system — Distinguish plating, powder coating, paint or another process and record preparation, colour, texture, sheen and approved sample
Execution checklist
- Confirmed and retained: Define joints, welding and grinding
- Confirmed and retained: Specify the complete finish system
- Confirmed and retained: Check floor and dissimilar-material contact
- Confirmed and retained: Validate for environment and packing
Related guides on this site
- Solid Wood, Veneer and Engineered Board Furniture Specifications
- Glass Furniture Specifications: Thickness, Edges, Holes and Support
- Outdoor Furniture Specifications: Exposure, Drainage, Fabric and Care
Frequently asked questions
Does “stainless colour” mean the product is stainless steel?
No. It may describe only an appearance; confirm substrate, finish process and use conditions separately.
Must hidden welds be included in the specification?
Yes. Hidden joints affect structure, assembly and durability, so define their location, method and verification.
Make metal, joints and finish independently verifiable
For project-specific execution, prepare the destination country, room list, quantities, critical dimensions, material preferences, budget direction and target timing, then use the contact section on this site.
